BIONIME  BLOOD GLUCOSE MONITORING SYSTEM

BIONIME Bionime diabetes test device, higher accuracy, ease of use, less pain.

• Automatic withdrawal of the examination sample.

• You will get your result in just 5 seconds.

• Memory capacity for 500 measurement results with date and time.

• Higher accuracy for the shortness of the examination area, which is made of gold.

• Battery life sufficient for about 1000 tests.

• Patented plastic strips to avoid cutting the examination area.

• Automatic alert for unsuitable conditions for examination.

How to use BIONIME  BLOOD GLUCOSE MONITORING SYSTEM

There are a variety of self-checking devices on the market, but they depend on the same principle when using. All of them operate on a battery and contain strips and a tool for pricking the skin using a special needle. The device is often stored in a small bag,

As for how to use it?

They are as follows: Turning on the device Inserting the tape into the device Making sure that the code written on the tape box and the code programmed into the device matches the code. Inserting the needle into the lancing device Sterilize the finger using sterile gauze, or regular gauze and medical alcohol. Prick the finger with the needle, applying a little pressure to get a drop of blood out. Place a drop of blood on the sensitive tape of the device. Wait a few seconds for the result to appear on the device.

Features of the glucose monitor

There are several characteristics of blood glucose meters that may differ from one device to another:

 the size:

 Glucose meters are about the size of the palm of the hand, and other types of devices that are larger or smaller may be available.

 Test strips:

 It is used only once, and it contains chemicals that react with the sugar in the blood drop. In general, these strips are made of plastic, and there is a small spot saturated with glucose or oxidase enzyme and other substances for the detection of sugar.

Coding:

The user of the device must manually enter the code on the vial of test strips or on a chip that is attached to the test strip, and by entering the coding code or the thin chip, the device will measure the blood sugar level by calibrating the device based on the category of test strips, and it is important that the process of Accurately calibrate because not doing this process correctly gives results that are not guaranteed at 4 mmol/L or 72 mg/dL.

blood sample size:

The volume ratio of the blood sample varies from one device to another, ranging from 0.3 to 1 microliter. Test Duration: The test strip reading time ranges from 3 seconds to 60 seconds depending on the type of equipment used.

show style:

The result of the blood glucose level is given in mg/dL or mmol/L.