Bionem Blood Glucose Monitoring System provides accurate results and helps you monitor your blood sugar levels to manage diabetes.

Benefits of Blood Glucose Monitoring System

• A home blood glucose monitor that provides accurate blood sugar level results.

• Easy to use.

• Helps monitor your blood sugar levels regularly.

How to use the Bionime Blood Glucose Meter?

• Wash your hands thoroughly with water and soap.

• Ensure that the test strips are valid before use.

• Insert the Bionime test strip into the device, making sure the device is turned on.

• Use the lancet device to make a small puncture on the tip of your finger (you may need to massage or warm the finger slightly to facilitate blood flow).

• Place a small drop of blood onto the test strip.

• Wait for a few moments until the device displays the result on the screen.

• Dispose of the used strips and do not reuse them.

• Record the reading (if desired).

Bionime Usage Precautions

• Be sure to read the attached instructions carefully before using the Bionem device.

• The minimum required blood sample size is 0.75 microliters.

• If you use a sample smaller than the required amount, the results may not be accurate or the device may not read the sample. In such cases, a new test strip should be used.

• Use the Bionem device with Bionem test strips only to measure blood sugar, as other strips may give inaccurate results.

• This device is for self-testing and is not intended for diagnosing diabetes.

• Do not use it for newborns.

• You may need to wait at least 30 minutes before performing the test if you have moved to another location with a different ambient temperature to ensure accurate results.

• The test strips should not be reused.

Storage Instructions

• Record the date of opening a new vial of Bionime blood glucose test strips. The vial should be discarded after 3 months from opening, even if unused strips remain inside.

• Store in a cool, dry place at a temperature between 4 - 30°C and a relative humidity of less than 90%.

• Do not expose the device to direct sunlight or heat.